How to buy a smart desk lift? There are four important aspects that need our attention.
1. Manual vs Electric: recommended order: Electric > hand shaking > one-time fixation. Electric and manual operation are completely different experiences. The electric lifting can be automatically lifted by buttons or remote control, with complete functions. The advantage of manual operation is that it is cheap and can be adjusted in case of power failure. However, it is troublesome to do it yourself, especially for one-time repair. If you need to adjust after fixing, you need to move things and spend a lot of time to adjust the height and level of the desktop. Therefore, if the budget is sufficient, it is recommended to choose electric ones, which is more convenient.
2. Single motor vs double motor: suggested sequence: double motor > single motor. The motor is the heart of the intelligent office lift, which directly affects the quality. Lifting is controlled by motor rotation, stable and durable. The independent motor is installed on one side of the table leg and drives the other side of the table leg to rise and fall through the connecting rod. The double motor is a motor installed in two directions, and the intermediate controller can rise and fall on both sides at the same time. Compared with single motor, double motor lifting is more stable, stable, more powerful, more load-bearing and more durable.
3. Three sections vs two sections: suggested order: three sections > two sections. The legs of the intelligent office lifting platform are generally two or three sections. The more sections, the greater the height range of the intelligent office lift. In order to adapt to more scenarios, it is recommended to select 3 chapters.
4. Formal installation vs reverse installation: recommended order: formal installation > reverse installation. It is wide at the bottom and narrow at the bottom, wide at the top and narrow at the bottom. Like the handle of the selfie stick, this kind of overall stability is better and more beautiful. The top of the flip is thick and the bottom is thin. It has a heavy head and light feet. The advantage is that both sides of the table are stable. However, if the oil leakage prevention design is not good, oil leakage will occur.
